【中文】
7B 变体使用 v1.x 版本的 ESP32-P4 芯片和 32MB flash，但 config.json 中
对应的 sdkconfig_append 既没声明芯片版本，也没声明 flash 大小。IDF 因此
默认按 rev v3.1 + 16MB flash 构建，bootloader 被链接脚本
bootloader.rev3.ld 放到 0x4ffa_xxxx 的高位 HP_SRAM，这个区域在 v1.x
硅上不可取指，ROM 加载完跳过去，CPU 在第一条指令就
"Guru Meditation Error: Core 0 panic'ed (Illegal instruction)"，
bootloader log 一行都打不出来。
添加 CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y + CONFIG_ESP32P4_REV_MIN_100=y
让 bootloader.ld（低位 HP_SRAM 0x4ff2_xxxx）被选中，并声明
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y + partitions/v2/32m.csv，使 image
header 和分区表和板子实际硬件对齐；CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=n
与已知 32MB 板子 sensecap-watcher 保持一致。
在 v1.3 版本的 P4-WIFI6-Touch-LCD-7B 上验证通过：bootloader 段现在加载到
0x4ff33ce0 / 0x4ff29ed0 / 0x4ff2cbd0；启动过程中 MIPI-DSI LCD、GT911
触控、OV5647 摄像头、ES8311+ES7210 音频和 ESP32-C6 SDIO 协处理器
全部正常初始化；状态机进入 wifi_configuring，对外发出 Xiaozhi-XXXX 配网热点。
---
[English]
The 7B variant ships with a v1.x ESP32-P4 silicon and a 32 MB flash, but
the existing sdkconfig_append declared neither. IDF then defaults to rev
v3.1 + 16 MB, and the bootloader is linked via bootloader.rev3.ld into
the 0x4ffa_xxxx upper HP_SRAM window. That range is not fetchable on
v1.x silicon, so the ROM jumps to the loaded bootloader and the CPU
panics on the first opcode with "Guru Meditation Error: Core 0 panic'ed
(Illegal instruction)" before any bootloader log is printed.
Add CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y + CONFIG_ESP32P4_REV_MIN_100=y
so bootloader.ld (low HP_SRAM 0x4ff2_xxxx) is used, and declare
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y + partitions/v2/32m.csv so the image
header and partition offsets match the board. Disable flash-mode
auto-detect for parity with the other known 32 MB board (sensecap-watcher).
Verified on a v1.3 P4-WIFI6-Touch-LCD-7B: bootloader segments now load
at 0x4ff33ce0 / 0x4ff29ed0 / 0x4ff2cbd0; boot completes through MIPI DSI,
GT911 touch, OV5647 camera, ES8311+ES7210 audio and the ESP32-C6 SDIO
coprocessor; device reaches wifi_configuring and exposes the Xiaozhi-XXXX AP.
* Enhance Otto Robot camera support by adding configuration for OV3660. Updated config.h to define camera types and GPIO settings, modified config.json to include new camera options, and refactored otto_robot.cc for improved camera detection and initialization logic.
* fix: 移除 OttoEmojiDisplay 构造函数中的 SetTheme 调用以修复 LoadProhibited 崩溃
Made-with: Cursor
* refactor: improve audio service error handling and codec timeout management
- Updated AudioService to prevent input task termination on read timeout, introducing a delay instead.
- Enhanced NoAudioCodec to implement a read timeout for I2S channel reads.
- Adjusted WebSocketControlServer to set a control port for improved socket management.
- Added manufacturer information to the config.json for waveshare ESP32-Touch-LCD-3.5.
* Enhance GitHub Actions artifact download script
- Updated the output directory structure to save downloaded files in a version-specific subdirectory (releases/<version>).
- Added a new function to determine the default releases directory path relative to the script's location.
- Improved artifact renaming logic to handle known extensions more robustly and ensure compatibility with filenames containing dots.
* Refactor UI setup in ElectronEmojiDisplay and OttoEmojiDisplay classes
- Moved SetupChatLabel call in ElectronEmojiDisplay to ensure it is executed after the parent UI is initialized, preventing potential issues with container validity.
- Updated SetupUI in OttoEmojiDisplay to release the display lock before calling SetEmotion, avoiding deadlock scenarios during UI setup.
* Add multiline chat message support in display configuration
- Introduced a new Kconfig option to enable multiline chat message display in the default mode.
- Updated the LCD display setup to accommodate a dynamic height bottom bar for multiline messages.
- Modified the configuration files for the waveshare-esp32-s3-epaper-1.54 board to include the new chat message setting.
* Update font and emoji settings for Magiclick boards; enhance bottom bar visibility logic in LCD display
- Changed the default text and emoji fonts for Magiclick S3 2P4 and S3 2P5 boards to Noto fonts.
- Improved bottom bar visibility logic in LcdDisplay to hide when there is no content, ensuring a cleaner UI experience.
* Add support for both hardware versions of waveshare-s3-epaper-1.54
* use v2 partition, reduced assets partition by 300k so that the app would fit
* add manufacturer
* updated readme
* CONFIG_SR_WN_WN9_NIHAOXIAOZHI_TTS=n to save space
* no custom font
* chore: Bump project version to 2.2.3 and refactor board configuration parsing in release script
- Updated PROJECT_VER in CMakeLists.txt from 2.2.2 to 2.2.3.
- Refactored the board configuration parsing logic in release.py to improve clarity and efficiency by eliminating the mapping function and directly searching for the board type in the CMakeLists.txt file.
* refactor: Remove unused system_info.h include and delete obsolete source root file
- Removed the inclusion of system_info.h in main.cc as it was no longer needed.
- Deleted the _codeql_detected_source_root file, which was obsolete.
* feat: Add lcd_init_cmds.h include for display initialization in esp32-p4-nano board
- Included the lcd_init_cmds.h header file in esp32-p4-nano.cc to support display initialization commands, enhancing the board's functionality.
* chore: Update build workflow and board configuration files
- Changed the build job name in the GitHub Actions workflow to use the full name of the matrix variant for better clarity.
- Refactored CMakeLists.txt to improve the formatting of the BOARD_SOURCES file globbing.
- Added manufacturer information to the config.json files for the eda-robot-pro, eda-super-bear, and eda-tv-pro boards to ensure consistency in configuration.
* chore: Update component versions and enhance UI setup across multiple boards
- Bumped uart-eth-modem version from ~0.3.2 to ~0.3.3 in idf_component.yml.
- Added SetupUI method to various display classes to ensure proper UI initialization before usage.
- Improved error handling in display classes to prevent issues when UI is not set up.
- Ensured UI customization is performed in SetupUI rather than constructors for better reliability.
* remove pm config code
content: Update the README.md
ci: Adapt to the lower directory
ci: the lower directory support
ci: board type errors fixed.
ci: board_type errors fixed to board_leaf.
fix: A naming error problem
fix: jd9365 member error
fix: Update product naming
feat: Add manufacturer parameters to the firmware name for 'release'
fix: Verification logic
fix: Verification logic
