【中文】
7B 变体使用 v1.x 版本的 ESP32-P4 芯片和 32MB flash，但 config.json 中
对应的 sdkconfig_append 既没声明芯片版本，也没声明 flash 大小。IDF 因此
默认按 rev v3.1 + 16MB flash 构建，bootloader 被链接脚本
bootloader.rev3.ld 放到 0x4ffa_xxxx 的高位 HP_SRAM，这个区域在 v1.x
硅上不可取指，ROM 加载完跳过去，CPU 在第一条指令就
"Guru Meditation Error: Core 0 panic'ed (Illegal instruction)"，
bootloader log 一行都打不出来。
添加 CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y + CONFIG_ESP32P4_REV_MIN_100=y
让 bootloader.ld（低位 HP_SRAM 0x4ff2_xxxx）被选中，并声明
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y + partitions/v2/32m.csv，使 image
header 和分区表和板子实际硬件对齐；CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=n
与已知 32MB 板子 sensecap-watcher 保持一致。
在 v1.3 版本的 P4-WIFI6-Touch-LCD-7B 上验证通过：bootloader 段现在加载到
0x4ff33ce0 / 0x4ff29ed0 / 0x4ff2cbd0；启动过程中 MIPI-DSI LCD、GT911
触控、OV5647 摄像头、ES8311+ES7210 音频和 ESP32-C6 SDIO 协处理器
全部正常初始化；状态机进入 wifi_configuring，对外发出 Xiaozhi-XXXX 配网热点。
---
[English]
The 7B variant ships with a v1.x ESP32-P4 silicon and a 32 MB flash, but
the existing sdkconfig_append declared neither. IDF then defaults to rev
v3.1 + 16 MB, and the bootloader is linked via bootloader.rev3.ld into
the 0x4ffa_xxxx upper HP_SRAM window. That range is not fetchable on
v1.x silicon, so the ROM jumps to the loaded bootloader and the CPU
panics on the first opcode with "Guru Meditation Error: Core 0 panic'ed
(Illegal instruction)" before any bootloader log is printed.
Add CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y + CONFIG_ESP32P4_REV_MIN_100=y
so bootloader.ld (low HP_SRAM 0x4ff2_xxxx) is used, and declare
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y + partitions/v2/32m.csv so the image
header and partition offsets match the board. Disable flash-mode
auto-detect for parity with the other known 32 MB board (sensecap-watcher).
Verified on a v1.3 P4-WIFI6-Touch-LCD-7B: bootloader segments now load
at 0x4ff33ce0 / 0x4ff29ed0 / 0x4ff2cbd0; boot completes through MIPI DSI,
GT911 touch, OV5647 camera, ES8311+ES7210 audio and the ESP32-C6 SDIO
coprocessor; device reaches wifi_configuring and exposes the Xiaozhi-XXXX AP.
content: Update the README.md
ci: Adapt to the lower directory
ci: the lower directory support
ci: board type errors fixed.
ci: board_type errors fixed to board_leaf.
fix: A naming error problem
fix: jd9365 member error
fix: Update product naming
feat: Add manufacturer parameters to the firmware name for 'release'
fix: Verification logic
fix: Verification logic
