feat: add M5Stack Cardputer Adv board support (#1718)

Add support for M5Stack Cardputer Adv, a card-sized computer based on
ESP32-S3FN8 (Stamp-S3A) with the following features:

Hardware:
- MCU: ESP32-S3FN8 @ 240MHz, 8MB Flash (no PSRAM)
- Display: ST7789V2 1.14" 240x135
- Audio: ES8311 codec + NS4150B amplifier
- Keyboard: 56-key via TCA8418
- IMU: BMI270

Key configurations:
- SPI3_HOST with 3-wire SPI mode for display
- 256Hz PWM frequency for backlight (matching M5GFX)
- ES8311 with use_mclk=false (no MCLK pin)
- Display offset X=40, Y=52 for correct alignment

新增 M5Stack Cardputer Adv 开发板支持

支持基于 ESP32-S3FN8 (Stamp-S3A) 的卡片式电脑 M5Stack Cardputer Adv：

硬件规格：
- MCU: ESP32-S3FN8 @ 240MHz, 8MB Flash (无 PSRAM)
- 显示屏: ST7789V2 1.14" 240x135
- 音频: ES8311 编解码器 + NS4150B 功放
- 键盘: 56键 (TCA8418)
- IMU: BMI270

关键配置：
- 显示使用 SPI3_HOST 和 3-wire SPI 模式
- 背光 PWM 频率 256Hz (与 M5GFX 一致)
- ES8311 设置 use_mclk=false (无 MCLK 引脚)
- 显示偏移 X=40, Y=52 以正确对齐

main/CMakeLists.txt

@@ -201,6 +201,11 @@ elseif(CONFIG_BOARD_TYPE_M5STACK_ATOM_S3R_CAM_M12_ECHO_BASE)
     set(BOARD_TYPE "atoms3r-cam-m12-echo-base")
 elseif(CONFIG_BOARD_TYPE_M5STACK_ATOM_ECHOS3R)
     set(BOARD_TYPE "atom-echos3r")
+elseif(CONFIG_BOARD_TYPE_M5STACK_CARDPUTER_ADV)
+    set(BOARD_TYPE "m5stack-cardputer-adv")
+    set(BUILTIN_TEXT_FONT font_puhui_basic_20_4)
+    set(BUILTIN_ICON_FONT font_awesome_20_4)
+    set(DEFAULT_EMOJI_COLLECTION twemoji_32)
 elseif(CONFIG_BOARD_TYPE_M5STACK_ATOM_MATRIX_ECHO_BASE)
     set(BOARD_TYPE "atommatrix-echo-base")
 elseif(CONFIG_BOARD_TYPE_XMINI_C3_V3)