Delay init success sound playback and remove gif playback delay (#1748)

* refactor: Remove hardcoded loop delay for GIF playback in LcdDisplay class

* chore: Update esp-ml307 and uart-eth-modem component versions in idf_component.yml

- Bump esp-ml307 version from ~3.6.3 to ~3.6.4
- Update uart-eth-modem version from ~0.3.1 to ~0.3.2

* feat: Add PrintPmLocks method to SystemInfo class

- Introduced PrintPmLocks method to display power management locks using esp_pm_dump_locks.
- Updated system_info.h to declare the new method.

* refactor: Streamline audio codec initialization and enablement

- Removed redundant channel enable checks from AudioCodec::Start.
- Added channel enablement in CreateDuplexChannels for various audio codecs.
- Implemented EnableInput and EnableOutput methods in NoAudioCodec for better control over input/output states.

* refactor: Delay audio success sound playback until after activation completion

- Moved the success sound playback to a scheduled task to ensure it occurs after the activation process is complete.
- This change improves the responsiveness of the application during activation events.

* refactor: Update camera integration from EspVideo to Esp32Camera

- Replaced EspVideo with Esp32Camera for improved camera configuration and initialization.
- Streamlined camera setup by utilizing a new configuration structure for better clarity and maintainability.
- Updated README.md to remove outdated camera sensor configuration instructions.

* refactor: Update audio demuxing process in AudioService

- Replaced the existing demuxer instance with a local unique pointer in the PlaySound method for better memory management.
- Moved the OnDemuxerFinished callback setup into the PlaySound method to ensure it is correctly associated with the new demuxer instance.
- Removed the member variable demuxer_ from AudioService to streamline the class structure.

main/boards/bread-compact-wifi-s3cam/README.md

@@ -24,26 +24,6 @@ idf.py menuconfig
 Xiaozhi Assistant -> Board Type ->面包板新版接线（WiFi）+ LCD + Camera
 ```
 
-**配置摄像头传感器：**
-
-> **注意：** 确认摄像头传感器型号，确定型号在 esp_cam_sensor 支持的范围内。当前板子用的是 OV2640，是符合支持范围。
-
-在 menuconfig 中按以下步骤启用对应型号的支持：
-
-1. **导航到传感器配置：**
-   ```
-   (Top) → Component config → Espressif Camera Sensors Configurations → Camera Sensor Configuration → Select and Set Camera Sensor
-   ```
-
-2. **选择传感器型号：**
-   - 选中所需的传感器型号（OV2640）
-
-3. **配置传感器参数：**
-   - 按 → 进入传感器详细设置
-   - 启用 **Auto detect**
-   - 推荐将 **default output format** 调整为 **YUV422** 及合适的分辨率大小
-   - （目前支持 YUV422、RGB565，YUV422 更节省内存空间）
-
 **编译烧入：**
 
 ```bash